Hand Printing Rubber Paste (Acrylic) White PT-78

Brief Introduction

The manual printing rubber paste is made by the acrylate monomers (self cross linking under the radiation of Cobalt 60 γ) and import Titanium Dioxide. It’s used to printing on cotton and blended fabric. It is very white, good elasticity,high coverage, soft hand feeling,good fastness and can be washed under 60℃ water for 120 minutes without falling off. Both the white and Clear paste are eco-friendly.

Features

1.Appearance: milk-white paste
2.Components:eco-friendly high elasticity rubber resin,import titanium(white paste) and auxiliaries
3.Ion:Anion
4.Viscosity(25°C,#4 rotor,6rpm): 40000-50000CPS
5.PH：7-8
 

Dosage

Notes

1.  100-120  mesh board，generally for cotton fabric print 2 times each time print 3 times, for high elastic fabric should print clear paste 2 times as bottom,then mix the white and clear with required pigment color,print 2 times again;
2. The  paste  can  dry  naturally  with  24  hours  or  cured for  2-3  minutes  at  130℃ temperature,for heat pressing under 130℃ then 10-15 seconds is enough;
3. The  paste  drying  speed  is  suitable,good  mechanical  and  chemical  stability,well compatible with many pigment dispersions;
4. The  paste  should  be  used  out  within   24  hours  after  adding  the   agent,the recommend time for using is 12 hours after mixing.

Package and Storage

1. White Paste:25kg/bucket
2.  Store in a cool and shade place,sealed well at 0-40℃ for 1 year.